How to choose the best earplugs when shooting guns

How to choose the best earplugs when shooting guns

By excessive noise exposure, you run the risk of ruining your hearing. Normal conversation is in the range between 60 and 70 dB. A gunshot can reach 140 dB, which is as loud as a jet and can be disastrous for your ears. Most people don’t notice the change right away, but in time they become aware that they can’t hear well.  How do we do that?

Earplugs vs. Muffs

Everything has its advantages and disadvantages. Earplugs might be smaller than the muffs, but they don’t necessarily fit well, which might leave you exposed to the loud sounds of guns. On the other hand, earmuffs can get in your way when shooting. They are too big and they can cause headaches. Luckily, there is a variety of choices when choosing the earplugs. What are some considerations when choosing the best earplugs for shooting guns?

In the lab

All the earplugs,as well as other hearing protection, need to be lab tested. You can’t sell them before that. After the tests, they get a Noise Reduction Rating (NRR). This tells us how many decibels the plugs can reduce. The higher the number, the better. A good level to have is between NRR22-33. Those are the best earplugs for shooting guns.

Material world

Most of the earplugs are disposable. The are made of foam and present an inexpensive way of protection. Besides being cheap, their advantage is that they are comfortable. Another comfortable material is wax, which is mold-able, so the earplugs fit like a glove. Finally, in this day and age, we have technology on our side. That mirrors in shooting area, too. You can buy electronic earplugs, which will allow the conversational level sounds to pass, while protecting you from high noise level. Take all of these into consideration when choosing the best earplugs for shooting guns.


Another thing to consider when choosing the best earplugs for shooting is the fit. You don’t want to hurt the ears, and the plugs too small will let the sounds through. Plugs should be able to sit well for a long period of time. Earplugs shouldn’t have cords or any other additions that can bother you while shooting.


While at the shooting range, you can choose any color you like, but if you are hunting, you don’t want loud colors. Pick the plugs you deem the best.

Using A Stud Finder While Working On Wall Fittings

Using A Stud Finder While Working On Wall Fittings

A thin drywall is not strong enough to take the weight of suspensions for a long time. That is why it’s always a bad idea to nail any pin on the thin part of the wall. Rather you should always find out the studs in the wall by using the best stud finders to locate the strongest parts of the wall for the fittings.

What are studs

Hollow wooden walls are supported by studs. Studs are beams of wood which runs from the ceiling to the bottom as multiple vertical supports, and support both planks of the wall on either side. Between two walls the studs are placed with a generally standard gap of 16 to 21 inches. Generally drywalls made of wood gets their structural strength from the stud. And studs are best located by the best stud finders.

Why find studs in the wall

Studs in the wall are those points on the wall where you find high density wall to drill a hole, hammer a nail, hang a wall hanging or furniture or fitting etc. Studs are wooden slats or beams which vary in thickness from wall to wall, but offer a high density zone of some 2 inches to drill holes and fix attachments on their structural support. You cannot hang those same things on the thin part of the wall, or else the wall with break from that portion soon, and structure would get damaged. Therefore it’s important to locate studs on the wall using best stud finders.

How to find studs in a wall

Studs are found or located on walls using a machine called stud finder. These machines are primarily of two types. They are the magnetic stud finder and the electrical stud finder. The electrical stud finder is the new age invention and thus offers the best stud finders.

Locating stud in a wall using a stud finder is an easy job, and a layman also can do this with little guidance. You simply need to glide or move the stud finder along the wall slowly, and watch the indicator light blink or shine significantly once a stud is detected. The machine works simply by detecting the difference in density of material or the presence of nails in the wall. Both would tell about the placement of a stud. And these machines work accurately.

As a homeowner to do your own DIY fittings, or as a handyman or professional you must own you own stud finder and get one from among the best stud finders.